数据处理的实用方法和算法

通过对正交多项式的构造和逼近准则的研究,得到了一类数据处理问题的一种较理想的逼近准则和算法。理论分析和模拟计算表明,用本文方法处理这类问题有较高的拟合精度并容易计算。     

基于仿射近似的摄像机标定

针对直接基于透视投影模型的标定算法计算量大、结果不稳定的事实,提出一种基于仿射投影矩阵的标定算法。算法首先线性解算仿射投影矩阵,然后分解出部分参数。在假定主点坐标等于图像中心的前提下,解算出其余参数,再以重投影图像点残差和为目标函数,对所有参数进行优化,获得精确的摄像机模型参数,达到精确、快速、稳定的标定目的。大量的仿真和真实图像实验证明算法比传统算法更稳定。     

Reliability inference for field conditions from accelerated degradation testing

Accelerated degradation testing (ADT) is usually conducted under deterministic stresses such as constant‐stress, step‐stress, and cyclic‐stress. Based on ADT data, an ADT model is developed to predict reliability under normal (field) operating conditions. In engineering applications, the “standard” approach for reliability prediction assumes that the normal operating conditions are deterministic or simply uses the mean values of the stresses while ignoring their variability. Such an approach may lead to significant prediction errors. In this paper, we extend an ADT model obtained from constant‐stress ADT experiments to predict field reliability by considering the stress variations. A case study is provided to demonstrate the proposed statistical inference procedure. The accuracy of the procedure is verified by simulation using various distributions of field stresses. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006.     

基于近似策略的联合优化方法

针对优化中收敛速度和优化解全局性的问题,提出了一种联合优化方法:构造原问题的近似模型,使用全局优化方法对近似函数进行优化,得到优化点作为初值,再使用局部优化方法对原问题进行优化.为了获得对原问题更好的近似,改进了径向基插值方法,以优化误差的方法来选择参数.利用临近空间机翼模型的优化对算法进行了测试,结果表明,优化参数的...     

双绝热近似下磁流体力学线性稳定性原理

本文得出了双绝热近似的磁流体力学能量积分关系式。分析表明这种磁流体力学系统是保守的,可以采用运动方程或能量原理方法分析系统的稳定性特性。本文从控制方程组出发讨论了线性稳定性的基本原理,指出纵向压力增值有助于系统的稳定性。     

Appointment scheduling at a multidisciplinary outpatient clinic using stochastic programming

The purpose of this paper is to investigate the problem of constructing an appointment template for scheduling patients at a specific type of multidisciplinary outpatient clinic called an integrated practice unit (IPU). The focus is on developing and solving a stochastic optimization model for a back pain IPU in the face of random arrivals, an uncertain patient mix, and variable service times. The deterministic version of the problem is modeled as a mixed integer program with the objective of minimizing a weighted combination of clinic closing time (duration) and total patient waiting time (length of stay). A two‐stage stochastic program is then derived to account for the randomness and the sequential nature of the decisions. Although it was not possible to solve the two‐stage problem for even a limited number of scenarios, the wait‐and‐see (WS) problem was sufficiently tractable to provide a lower bound on the stochastic solution. The introduction of valid inequalities, limiting indices, and the use of special ordered sets helped to speed up the computations. A greedy heuristic was also developed to obtain solutions much more quickly. Out of practical considerations, it was necessary to develop appointment templates with time slots at fixed intervals, which are not available from the WS solution. The first to be derived was the expected value (EV) template that is used to find the expected value of the EV solution (EEV). This solution provides an upper bound on the objective function value of the two‐stage stochastic program. The average gap between the EEV and WS solutions was 18%. Results from extensive computational testing are presented for the EV template and for our adaptation of three other templates found in the literature. Depending on the relative importance of the two objective function metrics, the results demonstrate the trade‐off that exists between them. For the templates investigated, the “closing time” ranged from an average of 235 to 275 minutes for a 300‐minute session, while the corresponding “total patient time in clinic” ranged from 80 to 71 minutes.     

基于旋转点电荷模型的舰船腐蚀电场

为了找出轴频电场无法彻底消除及实际测量中静电场产生波动曲线问题的原因,基于旋转点电荷的建模方法对舰船腐蚀电场进行研究。利用汉克尔变换对点电荷在三层介质中产生的电场进行近似求解,得出一定转速下感应电场随时间、螺旋桨半径及水面距离变化的规律曲线图,并通过实验验证了理论结果的正确性。结果表明:螺旋桨旋转产生的感应电场是构成舰船腐蚀电场的一部分,一定转速下的感应电场频率与螺旋桨转动频率一致,并会随着螺旋桨半径及与水面距离的增加而减小。     

导弹光学告警系统及对抗技术综述

详述了导弹羽烟热辐射的光电高速采集方法 ,并实时对导弹逼近告警。同时介绍了国外红外告警技术的发展现状     

Single‐machine scheduling with deadlines to minimize the total weighted late work

We consider scheduling a set of jobs with deadlines to minimize the total weighted late work on a single machine, where the late work of a job is the amount of processing of the job that is scheduled after its due date and before its deadline. This is the first study on scheduling with the late work criterion under the deadline restriction. In this paper, we show that (i) the problem is unary NP‐hard even if all the jobs have a unit weight, (ii) the problem is binary NP‐hard and admits a pseudo‐polynomial‐time algorithm and a fully polynomial‐time approximation scheme if all the jobs have a common due date, and (iii) some special cases of the problem are polynomially solvable.     

目标宽频带RCS的快速算法研究

目标宽带RCS预估算法一直是计算电磁学的一个研究热点，本文分别研究了渐近波形估计技术（AWE）与最佳一致逼近技术在宽频带RCS预估领域内的应用。首先，介绍了传统矩量法计算RCS的原理，并分析了两种快速算法的计算过程。然后，采用这两种技术，分别计算了简易飞机模型的RCS值，并对这两种方法进行比较。计算结果表明相比传统的矩量法，这两种方法在不影响精度的前提下大大提高了计算效率。同时，相比渐近波形估计技术，最佳一致逼近技术在节省内存，节约时间方面更具优势。最后，采用最佳一致逼近理论，结合电磁计算软件，实现较大尺寸目标的宽频带RCS的计算。